a symbol matches multiple clauses the last one takes precedence. If the
catch-all is last it captures everything. In the case of Qt5 libraries
this caused all symbols to have a Qt_5 label while some should have
Qt_5_PRIVATE_API. This only affects lld because GNU ld always gives the
catch-all lowest priority.
Older versions of Qt5Webengine exported some memory allocation symbols from
the bundled Chromium. Version 5.9 stopped exporting these [1] but the
symbols were kept as weak wrappers for the standard allocation functions to
maintain binary compatibility. [2][3] The problem is that the call to the
standard function in these weak wrappers is only resolved to the standard
function if there's a call to this standard function in other parts of
Qt5Webengine, because only then is there a non-weak symbol that takes
precedence over the weak one. If there's no such non-weak symbol the call
in the weak wrapper resolves to the weak wrapper itself creating an infinite
call loop that overflows the stack and causes a crash. Some of the
allocation functions are variants of C++ new and delete and it probably
depends on the compiler whether these variants are used in other parts of
Qt5Webengine.
Remove the weak wrappers (make them Linux specific). This isn't binary
compatible but we are already breaking that with the changes to the symbol
versions.
[1] 5c2cbfccf9
[2] 2ed5054e3a
[3] 009f5ebb4b
Bump all ports that depend on Qt5.
PR: 234070
Exp-run by: antoine
Approved by: kde (adridg)
* PyQt could not be installed for multiple Python versions at
the same time, as there were conflicting files.
This patch creates Python-version versioned directories for
all these, and further installs binaries with a version number.
* Note, there might be some hickups for software that depends on
on of the .so's provided by PyQt5, which might not be found
anymore autmotically, and maybe need some LD-flaggery.
* Update PyQt5 to 5.10.1
* Mark www/py-qt5-webengine broken. It is unforuntately no longer
compatible with the old qt5-webengine-5.9.4 we ship.
PR: 232745
Exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D8714
From now on, ports that depend on Qt4 will have to set
USES= qt:4
USE_QT= foo bar
ports depending on Qt5 will use
USES= qt:5
USE_QT= foo bar
PR: 229225
Exp-run by: antoine
Reviewed by: mat
Approved by: portmgr (antoine)
Differential Revision: →https://reviews.freebsd.org/D15540
Ports using USE_PYTHON=distutils are now flavored. They will
automatically get flavors (py27, py34, py35, py36) depending on what
versions they support.
There is also a USE_PYTHON=flavors for ports that do not use distutils
but need FLAVORS to be set. A USE_PYTHON=noflavors can be set if
using distutils but flavors are not wanted.
A new USE_PYTHON=optsuffix that will add PYTHON_PKGNAMESUFFIX has been
added to cope with Python ports that did not have the Python
PKGNAMEPREFIX but are flavored.
USES=python now also exports a PY_FLAVOR variable that contains the
current python flavor. It can be used in dependency lines when the
port itself is not python flavored. For example, deskutils/calibre.
By default, all the flavors are generated. To only generate flavors
for the versions in PYTHON2_DEFAULT and PYTHON3_DEFAULT, define
BUILD_DEFAULT_PYTHON_FLAVORS in your make.conf.
In all the ports with Python dependencies, the *_DEPENDS entries MUST
end with the flavor so that the framework knows which to build/use.
This is done by appending '@${PY_FLAVOR}' after the origin (or
@${FLAVOR} if in a Python module with Python flavors, as the content
will be the same). For example:
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}six>0:devel/py-six@${PY_FLAVOR}
PR: 223071
Reviewed by: portmgr, python
Sponsored by: Absolight
Differential Revision: https://reviews.freebsd.org/D12464
* Update Qt5 to 5.7.1
* Move Qt4 binaries to lib/qt4/bin
* Move Qt5 libraries to lib/qt5/lib
By moving the libraries we should finally be able to get rid of the inplace
upgrade bug (see ports bugs 194088, 195105 and 198720): when Qt5's libraries
were lying in /usr/local/lib, which would often get added by pkgconfig to the
linker paths via dependencies, the already installed libraries were linked
against, instead of the ones that were being built. This forced us to make
sure, that -L${WRKSRC}/lib was always coming before -L/usr/local/lib in the
linker flags. With this change this should no longer be the case.
* Rename some ports to match the rest (foo-qtX -> qtX-foo)
* Depend on new port misc/qtchooser [see UPDATING & CHANGES]
There are several new Qt5 ports which all have been created by Marie Loise Nolden
<nolden@kde.org>. Thanks again.
PR: 216797
Exp-Run by: antoine
Reviewed by: rakuco, mat, groot_kde.org
Approved by: rakuco (mentor)
Differential Revision: https://reviews.freebsd.org/D9213
pyqt.mk provides USE_PYQT=<list> to depend on its components. Convert the ports
not yet using it to it.
Reviewed by: rakuco, mat
Approved by: rakuco (mentor)
Differential Revision: https://reviews.freebsd.org/D9261
- Introduce new ports for the sqlalchemy 0.9 and 1.0 release branches.
- Deprecate the ports for the 0.6 and 0.7 release branches, as these
have been declared EoL and are no longer supported by upstream.
- Update to the latest available version in each branch.
In detail:
Port Version Maintainer
----------------------------------------------
py-sqlalchemy06 0.6.9 nivit@FreeBSD.org (Deprecate 2016-08-20) [1]
py-sqlalchemy07 0.7.10 nivit@FreeBSD.org (renamed py-sqlalchemy, Deprecate 2016-08-20) [1]
py-sqlalchemy08 0.8.7 nivit@FreeBSD.org (renamed py-sqlalchemy-devel) [1]
py-sqlalchemy09 0.9.10 m.tsatsenko@gmail.com (new, repocopy from py-sqlalchemy-devel) [2]
py-sqlalchemy10 1.0.13 m.tsatsenko@gmail.com (new, repocopy from py-sqlalchemy-devel) [2]
- Use options-helpers and option dependent make targets.
- Use autoplist for documents as well as python code
- Add all the docments to the packages: previously an arbitrary
subset was added in a way that excluded CSS, images and other HTML
assets.
- Use TEST_DEPENDS and add a TEST_TARGET instead of having a 'TEST'
option.
- Use py-pytest for 0.9.x and later, rather than py-nose.
- Add CONFLICTS_INSTALL between all of the py-sqlalchemyXY ports.
PR: 191442
Submitted by: robak
Reviewed by: robak
Reviewed by: pi
Approved by: nivit (maintainer timeout, ~300days) [1]
Approved by: m.tsatsenko@gmail.com (maintainer) [2]
Sponsored by: https://reviews.freebsd.org/D908
GCC 4.6.4 to GCC 4.7.3. This entails updating the lang/gcc port as
well as changing the default in Mk/bsd.default-versions.mk.
Part II, Bump PORTREVISIONs.
PR: 182136
Supported by: Christoph Moench-Tegeder <cmt@burggraben.net> (fixing many ports)
Tested by: bdrewery (two -exp runs)
- Switched to automake 1.11.6, see CVE-2012-3386.
- #14669: Fixed extraction of CC from gmp.h.
- Fixed case of intermediate zero real or imaginary part in mpc_fma,
found by hydra with GMP_CHECK_RANDOMIZE=1346362345.
This is on top of the following changes from version 1.0
- Licence change towards LGPLv3+ for the code and GFDLv1.3+ (with no
invariant sections) for the documentation.
- 100% of all lines are covered by tests
- Renamed functions
. mpc_mul_2exp to mpc_mul_2ui
. mpc_div_2exp to mpc_div_2ui
- 0^0, which returned (NaN,NaN) previously, now returns (1,+0).
- Removed compatibility with K&R compilers, which was untestable due
to lack of such compilers.
- New functions
. mpc_log10
. mpc_mul_2si, mpc_div_2si
- Speed-ups
. mpc_fma
- Bug fixes
. mpc_div and mpc_norm now return a value indicating the effective
rounding direction, as the other functions.
. mpc_mul, mpc_sqr and mpc_norm now return correct results even if
there are over- or underflows during the computation.
. mpc_asin, mpc_proj, mpc_sqr: Wrong result when input variable has
infinite part and equals output variable is corrected.
. mpc_fr_sub: Wrong return value for imaginary part is corrected.
Convert to the new LIB_DEPENDS standard and remove hard-coded
.so versions from a couple of dependent ports.
Bump PORTREVISIONS of all dependent ports.
PR: 183141
Approved by: portmgr (bdrewery)
