Commit b7f05445c0 has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.
This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.
Approved by: portmgr (tcberner)
It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.
Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.
There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.
This commit implements such a proposal and moves one of the WWW: entries
of each pkg-descr file into the respective port's Makefile. A heuristic
attempts to identify the most relevant URL in case there is more than
one WWW: entry in some pkg-descr file. URLs that are not moved into the
Makefile are prefixed with "See also:" instead of "WWW:" in the pkg-descr
files in order to preserve them.
There are 1256 ports that had no WWW: entries in pkg-descr files. These
ports will not be touched in this commit.
The portlint port has been adjusted to expect a WWW entry in each port
Makefile, and to flag any remaining "WWW:" lines in pkg-descr files as
deprecated.
Approved by: portmgr (tcberner)
which restores compatibility with old databases (version 1.8) and some
later versions which were built without mmap(2) support. Due to shlib
version change, bump port revisions of the consumer ports.
PR: 233059
Exp-run by: antoine
Approved by: maintainer (johans, numerous timeouts)
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
when an older version of a package is installed. This is the case when an
executable links with installed libraries and with uninstalled libraries
that link with other uninstalled libraries. For each of the directly
linked libraries the executable will have an rpath (/usr/local/lib for the
installed libraries and a path under WRKDIR for each of the uninstalled
libraries), but not for the indirect libraries. Both ld(1) and rtld(1)
search the rpath of the executable first before any rpath of libraries, so
the indirectly linked libraries will be found in /usr/local/lib if they are
installed instead of in WRKDIR.
With this commit executables will overlink with uninstalled indirect
libraries again so their location is added to the rpath of the executable.
This partially reverts r358784.
PR: 191611
Approved by: portmgr (bapt)
changes that Debian made to their libtool. The first command applies to
libtool versions 1.4 and up. The second command is somewhat more elaborate
but essentially it uses the sed hold space to move an "elif...fi" block
down. It applies to 2.x. Together these reduce overlinking to unpatched
.la files (from ports that don't have USES=libtool yet but also .la files
in the work directory).
The third and fourth command fix relinking. During staging libtool may
relink libA when it links to another library in the work directory libB.
The reason is that libA created during build phase has its runpath set to
the location of libB in the work directory. This allows running an
executable that links to libA from within the work directory. The relink
removes this extra runpath.
When libtool relinks libA it replaces "libB.la" on the linker command line
with "-L${STAGEDIR}${PREFIX}/lib -lB" with the intention to link to libB in
the stage directory but this -L flag isn't necessarily the first so another
libB may be linked instead. The two sed commands make relink the same as a
normal link. This means libtool will relink with libraries from the work
directory using a path similar to "../srcB/.libs/libB.so" without -L flags.
This applies to libtool 1.4 and up. Earlier versions don't seem to relink
libraries.
(This fixes ports like devel/apr1 so they link with freshly built libraries
instead of installed libraries.)
Fix all ports with missing libraries.
Additionally:
archivers/rpm4: USES=patchfix.
databases/gdbm: INSTALL_TARGET=install-strip.
devel/gnome-vfs: remove patch that doesn't change anything.
devel/ois: INSTALL_TARGET=install-strip and use standard USE_AUTOTOOLS.
devel/zziplib: INSTALL_TARGET=install-strip, MAKE_CMD.
multimedia/mjpegtools: remove USE_AUTOTOOLS, use modern compiler on i386
instead of disabling optimisations.
net/libnetdude: disable static plugins.
PR: 190941
Exp-run: antoine
Approved by: portmgr (antoine)
- Drop the article from COMMENT line
- Define LICENSE (GPLv3)
- Remove pre-everything target: OPTIONS framework is vocal enough
- Improve and move OPTIONS knobs lower in the Makefile
- Fix bad indentation in post-patch commands as appropriate
- Correct a typo and reformat port description, and point WWW to a more
up-to-date page version while I'm at it
Approved by: gabor (maintainer)
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
Specifically, newer autoconf (> 2.13) has different semantic of the
configure target. In short, one should use --build=CONFIGURE_TARGET
instead of CONFIGURE_TARGET directly. Otherwise, you will get a warning
and the old semantic may be removed in later autoconf releases.
To workaround this issue, many ports hack the CONFIGURE_TARGET variable
so that it contains the ``--build='' prefix.
To solve this issue, under the fact that some ports still have
configure script generated by the old autoconf, we use runtime detection
in the do-configure target so that the proper argument can be used.
Changes to Mk/*:
- Add runtime detection magic in bsd.port.mk
- Remove CONFIGURE_TARGET hack in various bsd.*.mk
- USE_GNOME=gnometarget is now an no-op
Changes to individual ports, other than removing the CONFIGURE_TARGET hack:
= pkg-plist changed (due to the ugly CONFIGURE_TARGET prefix in * executables)
- comms/gnuradio
- science/abinit
- science/elmer-fem
- science/elmer-matc
- science/elmer-meshgen2d
- science/elmerfront
- science/elmerpost
= use x86_64 as ARCH
- devel/g-wrap
= other changes
- print/magicfilter
GNU_CONFIGURE -> HAS_CONFIGURE since it's not generated by autoconf
Total # of ports modified: 1,027
Total # of ports affected: ~7,000 (set GNU_CONFIGURE to yes)
PR: 126524 (obsoletes 52917)
Submitted by: rafan
Tested on: two pointyhat 7-amd64 exp runs (by pav)
Approved by: portmgr (pav)
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet