Commit Graph

38 Commits

Author SHA1 Message Date
Dmitry Marakasov
cb81002061 - Add LICENSE_FILE
- Switch to options helpers
2015-12-29 09:41:26 +00:00
Mathieu Arnold
88bfe4bd43 Cleanup DIST* variables.
When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight
2015-05-11 18:34:57 +00:00
Baptiste Daroussin
45858fb087 Cleanup plist 2014-12-09 13:36:34 +00:00
Tijl Coosemans
60945f0277 Replace USES=libtool:oldver with USES=libtool or USES=libtool:keepla in
the 32 ports that still use it.  Bump PORTREVISION on their dependent
ports except the ones that depend on these:

audio/libogg
audio/libvorbis
devel/pcre
ftp/curl
graphics/jpeg
graphics/libart_lgpl
graphics/tiff
textproc/expat2
textproc/libxslt

In these cases the same trick as in the recent gettext update is used.
The ports install a symlink with the old library version.  When enough
of their dependent ports have had regular updates the remaining ones can
get a PORTREVISION bump and the links can be removed.

Also remove the devel/pcre dependency from USE_GNOME=glib20.  It causes
over 2200 packages to depend on devel/pcre while less than 200 actually
link with it.  The glib20 package still depends on devel/pcre so this
should not make a difference for ports with USE_GNOME=glib20.  Also,
libdata/pkgconfig/glib-2.0.pc lists pcre as a private library so
USE_GNOME=glib20 should not propagate it.

PR:		195724
Exp-run by:	antoine
Approved by:	portmgr (antoine)
2014-12-08 16:48:38 +00:00
Gerald Pfeifer
15945f8122 Update the default version of GCC in the Ports Collection from GCC 4.7.4
to GCC 4.8.3.

Part II, Bump PORTREVISIONs.

PR:		192025
Tested by:	antoine (-exp runs)
Approved by:	portmgr (implicit)
2014-09-10 20:50:31 +00:00
Rusmir Dusko
e32eeb8bc9 These ports are no longer used or cared for.
comms/spandsp-devel

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Strip library
- Fix typo

deskutils/kupfer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Change install, cosmetical changes

deskutils/rubrica

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Use tar:bzip2 instead of USE_BZIP2=yes
- Strip libraries
- Change REINPLACE and install, cosmetical changes

graphics/Hermes

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Use tar:bzip2 instead of USE_BZIP2=yes
- Don't silence warnings
- Remove TODO and TODO.conversion from DOCS
- Strip library

graphics/aoi

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/autoq3d

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/box

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Remove TODO from DOCS

graphics/boxer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes

graphics/cbrpager

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/cbview

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/cbviewer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/eos-movrec

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Change pkg-plist, remove mtree

graphics/evolvotron

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Break lines around 80 characters

graphics/fracplanet

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Remove TODO from DOCS
- Change Desktop entry file
- Break lines around 80 characters

graphics/gnofract4d

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/icon-slicer

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Use the new format for LIB_DEPENDS
- Remove TODO from DOCS

graphics/lcdtest

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Simplify dependency for x11-fonts/liberation-fonts-ttf

graphics/multican

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Remove TODO from DOCS

graphics/photopc

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes

graphics/pngcheck

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/pngwriter

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

graphics/pstoedit

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Strip libraries

graphics/skencil

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes
- Strip libraries

misc/boxes

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes
- Mute RM and MKDIR

misc/explosions

- Bump PORTREVISION for MAINTAINER change
- Remove FTP master site
- Reset maintainer to ports@

misc/wmweather+

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Use the new format for LIB_DEPENDS

multimedia/dvdauthor

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Remove TODO from DOCS

multimedia/dvdid

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Strip library

multimedia/freetuxtv

- Change Makefile header, use my name and @FreeBSD.org email
- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@

multimedia/gtk-youtube-viewer

- Change Makefile header, use my name and @FreeBSD.org email
- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Break lines around 80 characters

net/wlan2eth

- Bump PORTREVISION for MAINTAINER change
- Reset maintainer to ports@
- Cosmetical changes
2014-04-28 21:31:31 +00:00
Rusmir Dusko
3eb92a8f51 - Bump PORTREVISION
- Change master sites and add icon
- Take maintainership
- Add license (GPLv2)
- USES gmake instead of USE_GMAKE
- Change DOCS and add DOCS Option
- Add Desktop entry file
- Change pkg-plist, remove DOCS

PR:		ports/174069
Submitted by:	nemysis (self)
2014-02-02 22:20:34 +00:00
Baptiste Daroussin
8ac99398e2 Add NO_STAGE all over the place in preparation for the staging support (cat: misc) 2013-09-20 20:50:57 +00:00
Andrej Zverev
d98e1893f3 - Convert to new perl framework
- Trim Makefile header
2013-07-31 14:36:21 +00:00
Andrej Zverev
19ae251b54 - switch simple inline replacement from perl to sed
and remove where is no need in this anymore.
- trim Makefile header

Approved by:	bapt@ (portmrg@)
2013-07-26 07:33:41 +00:00
Eitan Adler
fd37d8821f Cleanup unmaintained ports in the misc category:
- Trim Header
	- Convert to OptionsNG
	- Prefer DISTNAME to DISTFILES
	- Reorder variables
	- Fix comments (don't include leading article)
	- @unexec rm must not cause failure
	- Tabs, not spaces
	- Single space for WWW
	- Pet portlint
	- etc.

In a few cases the option DOCS was used to control installation into EXAMPLEDIR.
I opted to keep the existing logic of the port in these cases.

Reviewed by:	koobs, ashish
2013-03-25 04:30:31 +00:00
Dirk Meyer
2b74a89bc8 - update png to 1.5.10 2012-06-01 05:26:28 +00:00
Martin Wilke
a9481afc8a - Get Rid MD5 support 2011-03-19 12:38:54 +00:00
Dirk Meyer
de78af3ac5 - update to 1.4.1
Reviewed by:	exp8 run on pointyhat
Supported by:	miwi
2010-03-28 06:47:48 +00:00
Dirk Meyer
ca9c60461c - update to jpeg-8 2010-02-05 11:46:55 +00:00
Marcus von Appen
6506e45d69 - Update devel/sdl12 to version 1.2.14.
- Update audio/sdl_mixer to version 1.2.11.
- Update graphics/sdl_gfx to version 2.0.20.
- Update graphics/sdl_image to version 1.2.10.
- Bump portrevisions for all ports depending on audio/sdl_mixer and
  graphics/sdl_image.
- Update Mk/bsd.sdl.mk accordingly for the new shared lib versions.

PR:		ports/142147 ports/142248 ports/142249
Approved by:	miwi (mentor implicit)
2010-01-30 09:43:31 +00:00
Doug Barton
2fadfa2cfb For ports maintained by ports@FreeBSD.org, remove names and/or
e-mail addresses from the pkg-descr file that could reasonably
be mistaken for maintainer contact information in order to avoid
confusion on the part of users looking for support. As a pleasant
side effect this also avoids confusion and/or frustration for people
who are no longer maintaining those ports.
2009-12-21 02:19:12 +00:00
Dirk Meyer
eca78ec61b - bump all port that indirectly depends on libjpeg and have not yet been bumped or updated
Requested by:	edwin
2009-07-31 13:57:52 +00:00
Martin Wilke
3e4ed01146 - Remove unneeded dependency from gtk12/gtk20 [1]
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+

Thanks to all Helpers:
	Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
	ehaupt, nox, itetcu, flz, pav

PR:		116263
Tested on:	pointyhat
Approved by:	portmgr (pav)
2008-04-19 17:56:05 +00:00
Martin Wilke
2d73db3533 - Chase devel/sdl12 shlib version bump 2008-03-13 14:28:35 +00:00
Florent Thoumie
d4f0d0048a - Welcome X.org 7.2 \o/.
- Set X11BASE to ${LOCALBASE} for recent ${OSVERSION}.
- Bump PORTREVISION for ports intalling files in ${X11BASE}.
2007-05-19 20:36:56 +00:00
Stanislav Sedov
0d2725682b - Update devel/sdl12 to version 1.2.11. Now we employ stock SDL directory
structure (i.e. include/SDL for includes and sdl-config for configuration
   binary)
 - Update graphics/sdl_ttf to version 2.0.8
 - Update graphics/sdl_image to version 1.2.5
 - Update audio/sdl_mixer to version 1.2.7
 - Update net/sdl_net to version 1.2.6
 - Update Mk/bsd.sdl.mk accordingly
 - Fix dependent ports to fit the new directory structure and avoid several
   API breakages
 - Bump up portrevisions for all dependent ports to allow them to be upgraded
   by portupgrade/portmaster etc tools

Approved by:    kris (portmgr), sem (mentor)
2006-09-20 11:21:59 +00:00
Mark Linimon
428ee0bc4b Reset petef due to no response to email. We hope to see him back sometime.
Hat:	portmgr
2006-04-14 20:45:44 +00:00
Edwin Groothuis
53354e7e9c SHA256ify
Approved by: krion@
2006-01-22 12:59:47 +00:00
Pete Fritchman
23430c6922 - make fetchable: new MASTER_SITES/WWW:
- update to 2005.07.31
- use %%DATADIR%% and %%DOCSDIR%%

Approved by:	portmgr (krion)
2005-08-21 05:07:42 +00:00
Trevor Johnson
8232e82f85 SIZEify (maintainer timeout) 2004-03-31 03:12:58 +00:00
Edwin Groothuis
c9ea361463 Chase library bump of libSDL-1.1 for all ports which were depending
on sdl12-1.2.5
2004-03-16 04:23:56 +00:00
Edwin Groothuis
84c834ee8f Let ports use the USE_SDL macro
PR:		ports/61807
Submitted by:	Edwin Groothuis <edwin@mavetju.org>
Approved by:	maintainer timeout
2004-03-07 23:39:10 +00:00
Joe Marcus Clarke
73f7c91b5d Bump PORTREVISION on all ports that depend on gettext to aid with upgrading.
(Part 1)
2004-02-04 05:10:27 +00:00
Trevor Johnson
7e223b8511 Define USE_PERL5_BUILD, not erroneous USE_PERL.
Submitted by:	Oliver Eikemeier
2003-11-20 15:06:14 +00:00
Trevor Johnson
318a536982 Define USE_PERL to make Perl available for (mostly deprecated)
"perl -pi -e" construction.
2003-11-20 13:51:47 +00:00
Ade Lovett
7e52725f2a Clear moonlight beckons.
Requiem mors pacem pkg-comment,
And be calm ports tree.

E Nomini Patri, E Fili, E Spiritu Sancti.
2003-03-07 06:14:21 +00:00
Maxim Sobolev
5c160ac5bd Update version number of SDL shared library. 2003-01-02 15:06:10 +00:00
Maxim Sobolev
1b3c0d7d6c Chase increase of libSDL version number. 2002-04-17 12:38:02 +00:00
Pete Fritchman
936fbc7d82 Update to 0.2001.10.29 2002-02-04 00:49:33 +00:00
Pete Fritchman
a2077b4e24 Add proper NOPORTDOCS support and a missing @dirrm
Noticed by:	bento
2001-10-05 00:53:00 +00:00
Pete Fritchman
35db8cc37d Change my email address to petef@FreeBSD.org for the ports I maintain.
Reviewed by:	ade
2001-08-22 23:07:23 +00:00
Mario Sergio Fujikawa Ferreira
d79868927d New port explosions version 0.2001.08.05: 3D objects flying around
resembling explosions with various effects.

Submitted by:	Pete Fritchman <petef@databits.net>
2001-08-08 17:56:08 +00:00