This has been broken for almost 10 months, and again 3 months of silence
from the maintainer, so let me step in to just fix it for the nonce.
- Add LICENSE=GPLv2+
- Add USES=makeinfo to fix .info file in clean-room builds (poudriere) [1]
- Reshuffle a few lines to please portclippy and portlint
- Bump PORTREVISION to flush out the broken packages and force rebuild
- Add DISABLED example to strip library in order to also please
stage-qa with DEVELOPER=yes (would require maintainer approval),
in post-install (just remove @: and the comment line to enable).
PR: 241879 [1]
Submitted by: Victor Sudakov <vas@sibptus.ru> [1]
Approved by: portmgr@ (blanket, see MFH below)
MFH: 2020Q3 (blanket LICENSE, dependencies to unbreak, modernization)
After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.
Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.
Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them
Bump revision of all impacted ports
PR: 232907
exp-run by: antoine
Differential Revision: https://reviews.freebsd.org/D17816
exists, libtool will add all libraries libB.la refers to (dependency_libs
field) to the linker command line and store them in the dependency_libs
field of libA.la. So everything that subsequently links with libA will also
link to these extra libraries. This causes too much overlinking.
This commit modifies Mk/Uses/libtool.mk so it empties the dependency_libs
field in .la libraries during staging. However, because .la libraries have
very limited use when dependency_libs is empty it makes sense to completely
remove them during staging.
So with this commit USES=libtool is modified to remove .la libraries and a
new form (USES=libtool:keepla) is introduced in case they need to be kept
(dependency_libs is still emptied).
PORTREVISION is bumped on all ports with USES=libtool that install .la
libraries. Most ports are also changed to add :keepla because .la
libraries have to be kept around as long as there are dependent ports with
.la libraries that refer to them in their dependency_libs field. In most
cases :keepla can be removed again as soon as all dependent ports that
install .la libraries have some form of USES=libtool added to their
Makefile.
PR: ports/188759
Exp-run: bdrewery
Approved by: portmgr (bdrewery)
- Replace PERL with REINPLACE_CMD in post-patch.
- Replace "iconv.h" with "${ICONV_PREFIX}/include/iconv.h" so
/usr/include/iconv.h is included on FreeBSD 10 even when
converters/iconv is installed. The port uses iconvctl(3) which
isn't declared in /usr/local/include/iconv.h with -DLIBICONV_PLUG.
- files/patch-lib-error.c: Implement program_name using __progname.
- files/patch-libiconv-Makefile.in: deleted because the libiconv
directory isn't built.
- files/patch-src-Makefile.in:
+ Remove chunks that aren't needed.
+ Remove ../lib/libreco.a from LIBS so CFLAGS+=-fPIC can be removed
from the port Makefile. Instead, just copy lib/error.c (the only
file needed from libreco.a) to src/error.c and compile it into
librecode.so.
PR: 186637
Approved by: demon (maintainer)
-Update libtool and libltdl to 2.2.6a.
-Remove devel/libtool15 and devel/libltdl15.
-Fix ports build with libtool22/libltdl22.
-Bump ports that depend on libltdl22 due to shared library version change.
-Explain what to do update in the UPDATING.
It has been tested with GNOME2, XFCE4, KDE3, KDE4 and other many wm/desktop
and applications in the runtime.
With help: marcus and kwm
Pointyhat-exp: a few times by pav
Tested by: pgollucci, "Romain Tartière" <romain@blogreen.org>, and
a few MarcusCom CVS users. Also, I might have missed a few.
Repocopy by: marcus
Approved by: portmgr
The affected ports are the ones with gettext as a run-dependency
according to ports/INDEX-7 (5007 of them) and the ones with USE_GETTEXT
in Makefile (29 of them).
PR: ports/124340
Submitted by: edwin@
Approved by: portmgr (pav)
- Remove USE_XLIB/USE_X_PREFIX/USE_XPM in favor of USE_XORG
- Remove X11BASE support in favor of LOCALBASE or PREFIX
- Use USE_LDCONFIG instead of INSTALLS_SHLIB
- Remove unneeded USE_GCC 3.4+
Thanks to all Helpers:
Dmitry Marakasov, Chess Griffin, beech@, dinoex, rafan, gahr,
ehaupt, nox, itetcu, flz, pav
PR: 116263
Tested on: pointyhat
Approved by: portmgr (pav)
in bsd.autotools.mk essentially makes this a no-op given that all the
old variables set a USE_AUTOTOOLS_COMPAT variable, which is parsed in
exactly the same way as USE_AUTOTOOLS itself.
Moreover, USE_AUTOTOOLS has already been extensively tested by the GNOME
team -- all GNOME 2.12.x ports use it.
Preliminary documentation can be found at:
http://people.FreeBSD.org/~ade/autotools.txt
which is in the process of being SGMLized before introduction into the
Porters Handbook.
Light blue touch-paper. Run.
the libtoolX ports instead of the one included with each port. Ports that
set USE_LIBTOOL_VER=X will now use the ports version of libtool instead of
the included version. To restore previous behavior, use the new macro,
USE_INC_LIBTOOL_VER. Both macros accept the same argument: a libtool version.
For example, to use the ports version of libtool-1.5, add the following to
your Makefile:
USE_LIBTOOL_VER= 15
To use the included version of libtool with extra hacks provided by
libtool-1.5, add the following to your Makefile:
USE_INC_LIBTOOL_VER= 15
With this change, ports that had to add additional libtool hacks to prevent
.la files from being installed or to fix certain threading issues can now
delete those hacks (after appropriate testing, of course).
PR: 63944
Based on work by:eik and marcus
Approved by: ade (autotools maintainer)
Tested by: kris on pointyhat
Bound to be hidden problems: You bet
Begin autotools sanitization sequence by requiring ports to explicitly
specify which version of {libtool,autoconf,automake} they need, erasing
the concept of a "system default".
For ports-in-waiting:
USE_LIBTOOL=YES -> USE_LIBTOOL_VER=13
USE_AUTOCONF=YES -> USE_AUTOCONF_VER=213
USE_AUTOMAKE=YES -> USE_AUTOMAKE_VER=14
Ports attempting to use the old style system after June 1st 2004 will be
sorely disappointed.
- switch devel/gettext (0.11.1) on, installing full package
- flip devel/gettext-old (0.10.35) to installing only static binaries
with a "-old" suffix -- gettext-old will have its deorbit burn
sequence initiated just after 4.6-RELEASE
- fix up ports for the new world order
Reviewed by: portmgr
previous commit message to bsd.port.mk, which said INSTALL_SHLIBS. Boo.)
Line up the rhs of variable assignments nicely. Remove a couple of extra
whitespaces while I'm here.
Suggested by: sobomax
Matthias Andree
Baptiste Daroussin
Tijl Coosemans
Mathieu Arnold
Dmitry Marakasov
Dmitry Sivachenko
Guido Falsi
Andrej Zverev
Marcus von Appen
Alex Kozlov
Ade Lovett
Jeremy Messenger
Edwin Groothuis
Martin Wilke
Joe Marcus Clarke
Kirill Ponomarev
Trevor Johnson
Martin Blapp
Maxim Sobolev
Satoshi Asami
Michael Haro