freebsd/ports
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ports/filesystems/e2fsprogs-core/Makefile
Matthias Andree a64852bd4f filesystems/e2fsprogs*: default-enable FUSEFS ALLTESTS 
I figured that the FreeBSD 14.3 kernel won't mount an ext[234]fs
created with inline_data option, while fuse2fs can do that.

Let's make that default, and since I've been successfully testing
on my amd64 computers with ALLTESTS (without SLOWTESTS), switch.
2025-07-02 18:05:47 +02:00

334 lines
11 KiB
Makefile
Raw Blame History

PORTNAME= e2fsprogs
PORTVERSION= 1.47.2
PORTREVISION?= 3 # NOTE: when bumping PORTREVISION, also bump ../e2fsprogs/Makefile!
CATEGORIES?= filesystems sysutils
MASTER_SITES= KERNEL_ORG/linux/kernel/people/tytso/${PORTNAME}/v${PORTVERSION}
MAINTAINER?= mandree@FreeBSD.org
COMMENT?= Utilities & library to manipulate ext2/3/4 filesystems
WWW= https://e2fsprogs.sourceforge.net/
LICENSE?= GPLv2+
.if !defined(_no_license_file)
LICENSE_FILE?= ${WRKSRC}/NOTICE
.endif
LICENSE_DISTFILES_GPLv2+ = ${DISTNAME}${EXTRACT_SUFX}
USES= cpe gmake makeinfo pkgconfig tar:xz
CPE_VENDOR= e2fsprogs_project
USE_CSTD= gnu99
# this seems a bit redundant to the --rpath below, but
# the latter should be more robust in case someone needs
# to deal with the file systems from a system not yet fully booted.
.if !defined(PKGNAMESUFFIX)
USE_LDCONFIG= ${PREFIX}/lib/e2fsprogs
.endif
GNU_CONFIGURE= yes
GNU_CONFIGURE_MANPREFIX= ${PREFIX}/share
CONFIGURE_ARGS?=--disable-fsck \
--disable-e2initrd-helper \
--disable-libuuid \
--disable-uuidd \
--disable-libblkid \
--enable-elf-shlibs \
--libdir='${PREFIX}/lib/e2fsprogs/' \
--includedir='${PREFIX}/include/e2fsprogs/' \
--with-root-prefix='${PREFIX}' \
LDFLAGS='${LDFLAGS} -L${LOCALBASE}/lib -Wl,--rpath -Wl,${LOCALBASE}/lib/e2fsprogs'
CONFIGURE_ENV?= LIBS='-Wl,--as-needed ${LIBS} -lexecinfo -lelf'
MAKE_ARGS+= pkgconfigdir='${PREFIX}/libdata/pkgconfig'
MAKE_ENV+= CHECK_CMD=@true
CPPFLAGS+= ${_FUSEFS_CFLAGS} -I${WRKSRC}/lib -I${LOCALBASE}/include
CFLAGS+= -Wno-unused-command-line-argument # -D_FILE_OFFSET_BITS=64 # the latter for fuse-libs
PIE_UNSAFE= yes
PORTSCOUT= ignore:1 # cannot handle the version in the directory
.if !defined(MASTERDIR)
CPPFLAGS+= -D__GNUC_PREREQ\(a,b\)=1
INSTALL_TARGET= install install-libs
PORTDOCS= NOTICE README RELEASE-NOTES SUBMITTING-PATCHES
OPTIONS_DEFINE= DOCS NLS BASHTESTS FUSEFS PARALLELTESTS SLOWTESTS LIBUNWIND
OPTIONS_DEFAULT= FUSEFS ALLTESTS
OPTIONS_SINGLE= SELFTEST
OPTIONS_SINGLE_SELFTEST= NOTESTS SMALLTESTS ALLTESTS
OPTIONS_EXCLUDE+= EXAMPLES
OPTIONS_SUB= yes
ALLTESTS_DESC= Run most self-tests (needs more RAM/disk space)
BASHTESTS_DESC= Enable tests that require the GNU bash shell
FUSEFS_DESC= Build user-land ext2/3/4 FUSE module (slow!)
LIBUNWIND_DESC= Backtrace with libunwind (do set WITH_DEBUG_PORTS+=${PKGORIGIN}!)
NOTESTS_DESC= Do not run any self-tests (Tier-1, DISCOURAGED)
PARALLELTESTS_DESC= Parallelize self-tests (needs more disk space)
SELFTEST_DESC= Choose which set of self-tests to run
SLOWTESTS_DESC= Enable slow tests that are skipped by default
SMALLTESTS_DESC=Run tests that need <500 MB disk space (DEFAULT)
BASHTESTS_BUILD_DEPENDS= ${BASH_CMD}:shells/bash
BASH_CMD= ${LOCALBASE}/bin/bash
FUSEFS_USES= fuse:3
FUSEFS_CONFIGURE_ENABLE= fuse2fs
# we can't use FUSEFS_CFLAGS, see below for workaround
FUSEFS_LDFLAGS= -L${LOCALBASE}/lib
FUSEFS_LIBS= -Wl,--as-needed -lfuse3 -lpthread
LIB_DEPENDS+= libblkid.so:filesystems/libblkid \
libuuid.so:misc/libuuid
LIBUNWIND_LIB_DEPENDS= libunwind.so:devel/libunwind
LIBUNWIND_LDFLAGS+= -rdynamic
LIBUNWIND_LIBS+= -L${LOCALBASE}/lib -lunwind
LIBUNWIND_EXTRA_PATCHES=${FILESDIR}/extrapatch-e2fsck_sigcatcher.c
NLS_USES= gettext iconv:build
.endif
# even under DEVELOPER, no REINPLACE_CMD warnings desired
# it simply makes no sense to warn about dozens of files
# for systematic edits that run over files that don't need the edits.
# a "warn if nothing was edited by one command" would be acceptable,
# but until we have that in the framework, just
# avoid Tools/scripts/sed_checked altogether:
REINPLACE_CMD= ${SED} ${REINPLACE_ARGS}
PKGDEINSTALL= ${PKGINSTALL}
MAKE_ARGS+= V=1
.include <bsd.port.options.mk>
.if ${MASTERDIR} == ${.CURDIR}
PKGNAMESUFFIX= -core
.endif
.if !empty(PORT_OPTIONS:MFUSEFS)
# this dance is required becuse the -I must go before the default -I${LOCALBASE}/include, so we can't use FUSEFS_CFLAGS
_FUSEFS_CFLAGS= -I${LOCALBASE}/include/fuse3
.else
_FUSEFS_CFLAGS=
.endif
. if ! empty(ARCH:Mpowerpc*)
# Fix powerpc64/powerpc SIGSEGV,
# see https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=231570 (ppc64)
# see https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=242798 (ppc32 - untested)
USES+= compiler:c11
. endif
.if empty(PORT_OPTIONS:MNOTESTS) && ${MASTERDIR} == ${.CURDIR}
USES+= perl5
USE_PERL5= build
.endif
.include <bsd.port.pre.mk>
.if ${PORT_OPTIONS:MNLS}
. if empty(ICONV_LIB)
libintl= ${LOCALBASE}/lib/libintl.a
. else
libintl= ${LOCALBASE}/lib/libintl.a ${LOCALBASE}/lib/libiconv.a
. endif
.else
CONFIGURE_ARGS+=--disable-nls
libintl=
.endif
.if ${MASTERDIR} == ${.CURDIR} && (${ARCH} == "aarch64" || ${ARCH} == "riscv64")
EXTRA_PATCHES+= ${FILESDIR}/extrapatch-no-sbrk
.endif
post-extract: # the symlink RELEASE-NOTES is stale in v1.47.1 and v1.47.2 tarballs, fix:
${RLN} ${WRKSRC}/doc/RelNotes/v1.47.2.txt ${WRKSRC}/RELEASE-NOTES
post-patch::
${TOUCH} ${WRKSRC}/tests/r_corrupt_fs/is_slow_test
.if !empty(DISTFILES)
@${REINPLACE_CMD} -e 's/<malloc\.h>/<stdlib.h>/' ${WRKSRC}/*/*.c
@${REINPLACE_CMD} -e 's,/etc/blkid.tab,${ETCDIR}/blkid.tab,' ${WRKSRC}/misc/blkid* ${WRKSRC}/lib/blkid/blkidP.h
@${REINPLACE_CMD} -E -e 's/__GNUC_PREREQ\>/__GNUC_PREREQ__/' ${WRKSRC}/*/*/*.[ch] ${WRKSRC}/*/*.c
. if empty(PORT_OPTIONS:MALLTESTS)
. for i in \
d_fallocate_blkmap \
f_baddir \
f_bbfile \
f_convert_bmap \
f_detect_junk \
f_inode_ea_collision \
f_lpffile \
f_no_cache_corrupt_inode \
f_opt_extent \
j_corrupt_descr_csum \
m_bigjournal \
m_hugefile_slack \
m_offset \
m_raid_opt \
r_32to64bit \
r_32to64bit_expand_full \
r_32to64bit_meta \
r_32to64bit_move_itable \
r_64to32bit \
r_64to32bit_meta \
r_expand_full \
r_min_itable \
t_change_uuid_mounted \
t_dangerous \
t_disable_changed_csum_seed_mounted \
t_disable_mcsum \
t_disable_mcsum_noinitbg \
t_disable_mcsum_yesinitbg \
t_enable_mcsum \
t_enable_mcsum_initbg \
t_iexpand_full \
t_iexpand_mcsum \
t_uninit_bg_rm \
u_dryrun \
u_mke2fs_opt_offset
@${MV} ${WRKSRC}/tests/${i} ${WRKSRC}/tests/disabled_test-${i}
. endfor
. endif
. if ${PORT_OPTIONS:MBASHTESTS}
${REINPLACE_CMD} -e 's}^SHELL *=.*}SHELL = ${_CHECK_SHELL}}' ${WRKSRC}/MCONFIG.in
. else
. for i in f_large_dir
@${MV} ${WRKSRC}/tests/${i} ${WRKSRC}/tests/disabled_test-${i}
. endfor
. endif
.endif
##############################################################
# Master port stuff that is not to be seen by the slave ports.
##############################################################
.if ${MASTERDIR} == ${.CURDIR}
# NOTE: The previous .if block goes all the way to the end of the file.
.if !empty(PORT_OPTIONS:MNOTESTS) && (${OPSYS} == FreeBSD) && (${OSVERSION} >= 1500000 || (${ARCH} != amd64))
BROKEN= it was not tested on your system by the maintainer; you must run self-tests
.endif
pre-build:
# fix up Makefile ordering for parallel builds
cd ${WRKSRC}/lib/et && ${DO_MAKE_BUILD} compile_et
cd ${WRKSRC}/lib/ss && _ET_DIR_OVERRIDE=../et ../et/compile_et ss_err.et \
&& ${REINPLACE_CMD} -f ${FILESDIR}/fix-ss_err.h.sed ss_err.h
cd ${WRKSRC}/lib/support && ${DO_MAKE_BUILD} prof_err.h
.if ${PORT_OPTIONS:MPARALLELTESTS}
_CHECK_JOBS=${_MAKE_JOBS}
.else
_CHECK_JOBS=
.endif
_checkaddargs=
.if ${PORT_OPTIONS:MBASHTESTS}
_CHECK_SHELL=${LOCALBASE}/bin/bash
_checkaddargs+=--eval SHELL:=${BASH_CMD}
.else
_CHECK_SHELL=${SH}
.endif
.if !defined(TMPDIR)
_checkaddargs+=TMPDIR=${WRKDIR}/tmp
.endif
.if ${PORT_OPTIONS:MSLOWTESTS}
_check_target=SKIP_SLOW_TESTS= check
_check_timeout=7200
.else
_check_target=check
_check_timeout=600
.endif
.if ${PORT_OPTIONS:MLIBUNWIND}
_staticlibs+=${LOCALBASE}/lib/libunwind.a /usr/lib/liblzma.a /usr/lib/libmd.a
.endif
post-build:
# Relink e2fsck statically - We need to make sure that tools for the root file
# system are statically linked against anything that is outside the root fs,
# else we're in trouble if e2fsck is needed for boot:
# (we don't use e2fsck.static, since we can link libc.so dynamically)
# NOTE: we need to link libgcc statically, it might be under /usr/local!
# => do not add a -Bdynamic - but instead list the dynamic libraries
# before the -Bstatic
cd ${WRKSRC}/e2fsck && ${RM} -f e2fsck \
&& ${MAKE_CMD} e2fsck V=1 \
LIBS="-static-libgcc -lc -Bstatic ../lib/libsupport.a ../lib/libext2fs.a ../lib/libcom_err.a \
${_staticlibs} /usr/lib/libexecinfo.a /usr/lib/libelf.a \
${LOCALBASE}/lib/libblkid.a ${LOCALBASE}/lib/libuuid.a ${libintl} ../lib/libe2p.a " \
&& ${STRIP_CMD} e2fsck
# Regression check: avoid a port (not upstream!) regression from 1.40.5,
# check that e2fsck isn't dynalinked against anything but libc.so:
@${ECHO_CMD} -n "===> checking that e2fsck depends on no shared objects outside /lib: "
@a="$$(ldd ${WRKSRC}/e2fsck/e2fsck 2>/dev/null \
| ${GREP} -v 'not a dynamic executable' \
| ${GREP} '=>' \
| ${AWK} '{print $$3;}' \
| ${EGREP} -v '^/lib/lib.*\.so\.' || :)"; \
if test "x$$a" = "x" ; then echo 'PASS' ; else \
echo 'FAIL' ; echo '===> e2fsck depends on:' ; echo "$$a" ; exit 1 ; fi
# Update translation binary files
.if ${PORT_OPTIONS:MNLS}
cd ${WRKSRC}/po && ${MAKE_CMD} update-gmo
.endif
# Build fsck(8) wrapper
${CC} ${CPPFLAGS} ${CFLAGS} ${LDFLAGS} -s ${LIBS} \
-o ${WRKSRC}/fsck_ext2fs ${FILESDIR}/fsck_ext2fs.c
# While the ${MAKE} check can take a minute on an end user's system, the
# correctness of tools such as e2fsck is critical to the health of the
# file systems. The upstream is not using any *BSD as his development
# system, and therefore let's exercise due diligence in running the self-
# test on each and every system and not just package building hosts.
# There have been subtle failures induced by Linux-isms in the past.
# -- Matthias Andree, package maintainer, 2007-09-18
.if empty(PORT_OPTIONS:MNOTESTS)
@${ECHO_CMD} '===> Running e2fsprogs self-test suite'
# do not add -j options unconditionally to ${MAKE_CMD} below, this might break
# due to excessive disk space use.
cd ${WRKSRC}/tests && \
ulimit -t ${_check_timeout} && \
${MKDIR} ${WRKDIR}/tmp && \
${SETENV} e2fsprogs_inhibit_SIGINFO=1 BLKID_FILE=${WRKDIR}/tmp/blkid.tab SHELL=${_CHECK_SHELL} \
${MAKE_CMD} ${_check_target} ${_CHECK_JOBS} ${_checkaddargs} \
|| { head -n30000 ${WRKSRC}/tests/*.failed 2>/dev/null ; exit 1 ; }
.else
@${ECHO_CMD} '===> SKIPPING e2fsprogs self-test suite (DISCOURAGED!)'
.endif
post-install:
${INSTALL_PROGRAM} ${WRKSRC}/fsck_ext2fs ${STAGEDIR}${PREFIX}/sbin/
${LN} -fs e2fsck ${STAGEDIR}${PREFIX}/sbin/fsck.ext2
${LN} -fs e2fsck ${STAGEDIR}${PREFIX}/sbin/fsck.ext3
${LN} -fs e2fsck ${STAGEDIR}${PREFIX}/sbin/fsck.ext4
# now the remainder of the usual post-install jobs:
${INSTALL_MAN} ${FILESDIR}/fsck_ext2fs.8 ${STAGEDIR}${PREFIX}/share/man/man8/
.if ${PORT_OPTIONS:MDOCS}
${MKDIR} ${STAGEDIR}${DOCSDIR}
.for i in ${PORTDOCS}
${INSTALL_DATA} ${WRKSRC}/${i} ${STAGEDIR}${DOCSDIR}
.endfor
.endif
# remove or relocate files installed by other ports already, or shadowing system files:
${MV} ${STAGEDIR}${PREFIX}/bin/compile_et ${STAGEDIR}${PREFIX}/bin/e2fsprogs-compile_et
${MV} ${STAGEDIR}${PREFIX}/share/man/man1/compile_et.1 ${STAGEDIR}${PREFIX}/share/man/man1/e2fsprogs-compile_et.1
${MKDIR} ${STAGEDIR}${DATADIR}/et/
${MV} ${STAGEDIR}${PREFIX}/share/et/* ${STAGEDIR}${DATADIR}/et/
${REINPLACE_CMD} -e 's}^DIR=.*$$}DIR=${DATADIR}/et}' -i '' ${STAGEDIR}${PREFIX}/bin/e2fsprogs-compile_et
${RMDIR} ${STAGEDIR}${PREFIX}/share/et
${MV} -f ${STAGEDIR}${PREFIX}/share/man/man3/com_err.3 \
${STAGEDIR}${PREFIX}/share/man/man3/e2fsprogs-com_err.3
${RM} ${STAGEDIR}${PREFIX}/share/man/man3/libblkid.3
#
# the next line closes .if ${MASTERDIR} == ${.CURDIR}
.endif
.include <bsd.port.post.mk>
Reference in New Issue View Git Blame Copy Permalink