sysutils/py-google-compute-engine: revive port

This reverts commit 5a7ff51021 and uses
www/py-boto3 instead of the removed devel/py-boto, and releng-gce@
assumes maintainership.

This is meant to be a temporary measure as we are exploring alternatives
for GCE support.

MFH:	2025Q2
This commit is contained in:
Xin LI
2025-05-08 22:17:30 -07:00
parent 77e5783539
commit 592b450ab9
15 changed files with 342 additions and 1 deletions
-1
View File
@@ -4248,7 +4248,6 @@ textproc/rubygem-nokogumbo||2025-03-31|Has expired: Upstream has merged into tex
net/libmediawiki||2025-03-31|Has expired: Project abandoned upstream
net/py-tacacs_plus||2025-03-31|Has expired: Depends on expired devel/py-pytest-runner
devel/py-imgkit||2025-03-31|Has expired: Depends on expired converters/wkhtmltopdf
sysutils/py-google-compute-engine||2025-03-31|Has expired: Depends on expired devel/py-boto
devel/ocaml-type_conv|devel/ocaml-ppxlib|2025-03-31|Has expired: Deprecated, upstream recommends migrating to devel/ocaml-ppxlib
multimedia/dirac||2025-03-31|Has expired: Legacy video codec superseded by multiple formats. Files can be decoded using FFmpeg
ports-mgmt/py-pytoport||2025-03-31|Has expired: Depends on expired misc/py-spdx-lookup
+1
View File
@@ -1028,6 +1028,7 @@
SUBDIR += py-filelock
SUBDIR += py-focker
SUBDIR += py-glances
SUBDIR += py-google-compute-engine
SUBDIR += py-hared
SUBDIR += py-hcloud
SUBDIR += py-honcho
@@ -0,0 +1,51 @@
PORTNAME= google-compute-engine
DISTVERSION= 2.8.17
PORTREVISION= 2
CATEGORIES= sysutils python
PKGNAMEPREFIX= ${PYTHON_PKGNAMEPREFIX}
MAINTAINER= releng-gce@FreeBSD.org
COMMENT= Guest Environment for Google Compute Engine
WWW= https://github.com/GoogleCloudPlatform/compute-image-packages
LICENSE= APACHE20
LICENSE_FILE= ${WRKSRC}/LICENSE
RUN_DEPENDS= ${PYTHON_PKGNAMEPREFIX}boto3>0:www/py-boto3@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}distro>0:sysutils/py-distro@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}netaddr>0:net/py-netaddr@${PY_FLAVOR} \
${PYTHON_PKGNAMEPREFIX}netifaces>0:net/py-netifaces@${PY_FLAVOR} \
google_oslogin_control:sysutils/google-compute-engine-oslogin \
sudo:security/sudo
USES= python shebangfix
USE_PYTHON= autoplist concurrent distutils
WRKSRC_SUBDIR= packages/python-google-compute-engine
NO_ARCH= yes
SHEBANG_FILES= ../google-compute-engine/src/usr/bin/google_optimize_local_ssd \
../google-compute-engine/src/usr/bin/google_set_multiqueue
USE_GITHUB= yes
GH_ACCOUNT= GoogleCloudPlatform
GH_PROJECT= compute-image-packages
GH_TAGNAME= 20190522
USE_RC_SUBR= google_accounts_daemon google_clock_skew_daemon \
google_instance_setup google_network_daemon google_startup
SUB_LIST= PYTHON_CMD="${PYTHON_CMD}" \
PYTHON_VER="${PYTHON_VER}"
REINPLACE_ARGS= -i ''
post-install:
@${MKDIR} ${STAGEDIR}${PREFIX}/etc/syslog.d ${STAGEDIR}/etc
${INSTALL_DATA} ${FILESDIR}/instance_configs.cfg.distro.sample \
${STAGEDIR}${PREFIX}/etc/instance_configs.cfg.distro.sample
${INSTALL_DATA} ${FILESDIR}/90-google.conf.sample \
${STAGEDIR}${PREFIX}/etc/syslog.d/90-google.conf.sample
${INSTALL_DATA} ${FILESDIR}/google_set_hostname \
${STAGEDIR}/etc/dhclient-exit-hooks
.include <bsd.port.mk>
@@ -0,0 +1,3 @@
TIMESTAMP = 1618297612
SHA256 (GoogleCloudPlatform-compute-image-packages-2.8.17-20190522_GH0.tar.gz) = 8cfb338c3c768ea7e76e479728a1438b2f10b0df13bddd70c9fbcbfc1273efd6
SIZE (GoogleCloudPlatform-compute-image-packages-2.8.17-20190522_GH0.tar.gz) = 132314
@@ -0,0 +1,6 @@
# Google Compute Engine default console logging.
#
# daemon: logging from Google provided daemons.
# kern: logging information in case of an unexpected crash during boot.
#
daemon,kern.* /dev/console
@@ -0,0 +1,35 @@
#!/bin/sh
# PROVIDE: google_accounts_daemon
# BEFORE: LOGIN
# REQUIRE: NETWORKING syslogd google_instance_setup google_network_daemon
# KEYWORD: shutdown
#
# google_accounts_daemon_enable (bool): Set to NO by default.
# Set it to YES to enable google_accounts_daemon.
#
. /etc/rc.subr
# Required to execute scripts
export PATH=%%LOCALBASE%%/bin:$PATH
name="google_accounts_daemon"
rcvar="google_accounts_daemon_enable"
load_rc_config "${name}"
: ${google_accounts_daemon_enable:="NO"}
command_interpreter="%%PYTHON_CMD%%"
command=%%PREFIX%%/bin/${name}-%%PYTHON_VER%%
pidfile=/var/run/${name}.pid
start_cmd="google_accounts_daemon_start"
google_accounts_daemon_start()
{
check_startmsgs && echo "Starting ${name}."
daemon -p ${pidfile} -t ${name} ${command}
}
run_rc_command "$1"
@@ -0,0 +1,32 @@
#!/bin/sh
# PROVIDE: google_clock_skew_daemon
# BEFORE: LOGIN
# REQUIRE: NETWORKING syslogd ntpd google_instance_setup google_network_daemon
# KEYWORD: shutdown
#
# google_clock_skew_daemon_enable (bool): Set to NO by default.
# Set it to YES to enable google_clock_skew_daemon.
#
. /etc/rc.subr
name="google_clock_skew_daemon"
rcvar="google_clock_skew_daemon_enable"
load_rc_config "${name}"
: ${google_clock_skew_daemon_enable:="NO"}
command_interpreter="%%PYTHON_CMD%%"
command=%%PREFIX%%/bin/${name}-%%PYTHON_VER%%
pidfile=/var/run/${name}.pid
start_cmd="google_clock_skew_daemon_start"
google_clock_skew_daemon_start()
{
check_startmsgs && echo "Starting ${name}."
daemon -p ${pidfile} -t ${name} ${command}
}
run_rc_command "$1"
@@ -0,0 +1,25 @@
#!/bin/sh
# PROVIDE: google_instance_setup
# BEFORE: LOGIN
# REQUIRE: NETWORKING syslogd
#
# google_instance_setup_enable (bool): Set to NO by default.
# Set it to YES to enable google_instance_setup.
#
. /etc/rc.subr
name="google_instance_setup"
rcvar="google_instance_setup_enable"
stop_cmd=":"
load_rc_config "${name}"
: ${google_instance_setup_enable:="NO"}
command_interpreter="%%PYTHON_CMD%%"
command=%%PREFIX%%/bin/${name}-%%PYTHON_VER%%
pidfile=/var/run/${name}.pid
run_rc_command "$1"
@@ -0,0 +1,32 @@
#!/bin/sh
# PROVIDE: google_network_daemon
# BEFORE: LOGIN
# REQUIRE: NETWORKING syslogd google_instance_setup google_network_daemon
# KEYWORD: shutdown
#
# google_network_daemon_enable (bool): Set to NO by default.
# Set it to YES to enable google_network_daemon.
#
. /etc/rc.subr
name="google_network_daemon"
rcvar="google_network_daemon_enable"
load_rc_config "${name}"
: ${google_network_daemon_enable:="NO"}
command_interpreter="%%PYTHON_CMD%%"
command=%%PREFIX%%/bin/${name}-%%PYTHON_VER%%
pidfile=/var/run/${name}.pid
start_cmd="google_network_daemon_start"
google_network_daemon_start()
{
check_startmsgs && echo "Starting ${name}."
daemon -p ${pidfile} -t ${name} ${command}
}
run_rc_command "$1"
@@ -0,0 +1,60 @@
#!/bin/sh
# Copyright 2016 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Deal with a new hostname assignment.
if [ -n "$new_host_name" ] && [ -n "$new_ip_address" ]; then
# Delete entries with new_host_name or new_ip_address in /etc/hosts.
sed -i "" '/Added by Google/d' /etc/hosts
# Add an entry for our new_host_name/new_ip_address in /etc/hosts.
echo "${new_ip_address} ${new_host_name} ${new_host_name%%.*} # Added by Google" >> /etc/hosts
# Add an entry for reaching the metadata server in /etc/hosts.
echo "169.254.169.254 metadata.google.internal # Added by Google" >> /etc/hosts
fi
# /sbin/dhclient-scripts in both ubuntu and centos have some problems for us:
# 1) BOUND doesn't always set hostname (e.g. if old_host_name is unset in
# precise pangolin)
# 2) Using too long of a FQDN as a hostname causes some tools to break in
# some distros (e.g. ssh-keygen) and hostname tool complains when given
# a FQDN that is > 64 bytes.
#
# As a result, we set the host name in all circumstances here, to the truncated
# unqualified domain name.
if [ -n "$new_host_name" ]; then
hostname "${new_host_name%%.*}"
# If NetworkManager is installed set the hostname with nmcli.
# to resolve issues with NetworkManager resetting the hostname
# to the FQDN on DHCP renew.
nmcli=$(which nmcli 2> /dev/null)
if [ -x "$nmcli" ]; then
nmcli general hostname "${new_host_name%%.*}"
fi
# Restart rsyslog to update the hostname.
systemctl=$(which systemctl 2> /dev/null)
if [ -x "$systemctl" ]; then
hasrsyslog=$($systemctl | grep rsyslog | cut -f1 -d' ')
if [ ! -z "$hasrsyslog" ]; then
$systemctl -q --no-block restart "$hasrsyslog"
fi
else
pkill -HUP syslogd
fi
fi
@@ -0,0 +1,43 @@
#!/bin/sh
# PROVIDE: google_startup
# BEFORE: LOGIN
# REQUIRE: NETWORKING syslogd google_instance_setup google_network_daemon
# KEYWORD: shutdown
#
# google_startup_enable (bool): Set to NO by default.
# Set it to YES to enable google_startup.
#
. /etc/rc.subr
# Required to execute gsutil
export PATH=%%LOCALBASE%%/bin:$PATH
name="google_startup"
rcvar="google_startup_enable"
load_rc_config "${name}"
: ${google_startup_enable:="NO"}
command_interpreter="%%PYTHON_CMD%%"
command=%%PREFIX%%/bin/google_metadata_script_runner-%%PYTHON_VER%%
command_startup_args="--script-type startup"
command_shutdown_args="--script-type shutdown"
pidfile=/var/run/${name}.pid
start_cmd="google_startup_start"
stop_cmd="google_startup_stop"
google_startup_start()
{
${command} ${command_startup_args}
}
google_startup_stop()
{
echo "Stopping ${name}."
${command} ${command_shutdown_args}
}
run_rc_command "$1"
@@ -0,0 +1,17 @@
[Accounts]
gpasswd_add_cmd = pw groupmod {group} -m {user}
gpasswd_remove_cmd = pw groupmod {group} -d {user}
useradd_cmd = pw useradd {user} -m
userdel_cmd = pw userdel {user} -r
usermod_cmd = pw usermod {user} -G {groups}
groupadd_cmd = pw groupadd {group}
[MetadataScripts]
default_shell = /bin/sh
[InstanceSetup]
set_multiqueue = false
optimize_local_ssd = false
# google-cloud-sdk only supports python2 at the moment, disabling boto will
# avoid issues when running this agent with python3.
set_boto_config = false
@@ -0,0 +1,12 @@
Google Compute Engine offers scripts and daemons which run in the
background and provides the following services:
- Accounts daemon to setup and manage user accounts, and to enable SSH key based
authentication.
- Clock skew daemon to keep the system clock in sync after VM start and stop
events.
- Instance setup scripts to execute VM configuration scripts during boot.
- IP forwarding daemon that integrates network load balancing with forwarding
rule changes into the guest.
- Metadata scripts to run user provided scripts at VM startup and shutdown.
- Network setup service to enable multiple network interfaces on boot.
@@ -0,0 +1,22 @@
[
{ type: install
message: <<EOM
google-compute-engine has been installed, and the following services are
available:
google_accounts_daemon Responsible for provisioning and
deprovisioning user accounts
google_clock_skew_daemon Responsible for syncing the software clock with
the hypervisor clock
google_instance_setup Configure the guest at boot
google_network_daemon Responsible to manage network interfaces and ip
routes in the guest
google_startup Implement support for running host provided
startup / shutdown scripts
To enable the above services, sysrc <servicename>_enable=YES
Reboot your system or start the services, service <servicename> start
EOM
}
]
@@ -0,0 +1,3 @@
@sample etc/instance_configs.cfg.distro.sample
@sample etc/syslog.d/90-google.conf.sample
/etc/dhclient-exit-hooks